STEINCONNECTOR Quick Release Coupling Gas Coupling Set G1/4" Series 090.Gas Safety Lock

STEINCONNECTOR Quick Release Coupling Series 090.Q Quick Connect

"The ingenious combination of gas grill & gas bottle"

The STEINCONNECTOR quick-release coupling is the ideal solution to finally end the annoying screwing on and off of the gas bottle or the time-consuming connection of the low-pressure regulator with the grill hose and its grill. Whether a gas cooker has to be connected to the gas grill when camping with the motorhome or the gas bottle with the gas grill during a summer barbecue, the STEINCONNECTOR gas coupling allows you to establish the connection in seconds. Gone is the spasm during installation with the low-pressure regulator or the gas hoses to hit the left thread of the gas cylinder correctly without tilting.

When developing the STEINCONNECTOR quick-release coupling, the manufacturer attached particular importance to quality, functionality and the simplest possible handling.

Application:

The gas coupling is installed only once by connecting the plug-in nipple to the emitting hose of the gas grill, radiant heater or camping stove and the quick-release coupling with the low-pressure regulator of the gas bottle. This enables a quick and safe change of the various gas appliances. It is advisable to order additional plug-in nipples here, as they can quickly and easily switch between all their devices with a coupling and several plug-in nipples.

Alternatively, they can install the clutch directly on their gas grill and screw the nipple to the end of the hose from the gas cylinder. As a result, they do not have a disturbing hose on the grill when storing the grill.

It is also conceivable to install the coupling on its gas grill and a hose with two plug-in nipples and another coupling on the low-pressure regulator. Thus, you can also connect American grills with the German threaded elements. You save yourself the effort for expensive adapters.

After installation, they insert the hose and the gas coupling with plug-in nipples into each other. The mechanism locks in safely. To disconnect the connection again, the release sleeve is retracted, this is so easy that you can even do it one-handed.

The quick-release coupling may only be operated on propane or butane gas cylinders. Before the connection is made, it must be checked for impurities. The connection must be checked with a leak detection spray.

With the STEINCONNECTOR quick-release coupling you have a well thought-out quality product"made in
germany"at hand, with which the connection of the gas cylinder to your various devices always works easily, quickly and safely.

So when it comes to gas accessories, you can rely on STEINCONNECTOR and enjoy your barbecue and camping holiday relaxed. The extra time you used to install the gas bottle can now be used to grill a few extra sausages for your guests.

Technical details:

· Quick release coupling with internal thread G1/4

· Plug-in nipples with male thread G1/4

· One-hand coupling with 5-point locking by balls

· Inlet pressure 6 bar, preset pressure drop 1 bar

· Flow rate 600 l/min

· operating pressure 35 bar (without pulsation)

· Temperature range seal NBR -20°C to +80°C

· Connection, base body, made of material: brass

· Unlocking sleeve made of material: aluminium red anodized

· Plug-in nipples made of material: brass

· Seals made of material: NBR

· Blasting ring and springs Made of material: 1.4310

· Propane gas and butane gas applications

· made in
germany